Tag: AVRDUDE
-
AVRHexFlashGUI: an AVRdude Hex Flasher GUI Application with Quick Flash Floating Button
Introduction To program the AVR microcontroller you use “avrdude” to flash the hex files in the microcontroller. avrdude is a command line tool. Every time you have to flash the microcontroller with a new file you have to write the command. This AVRHexFlashGUI uses the avrdude software to flash the microcontroller but it provides a…
-
How to add USBASP as External Tool in Microchip studio
Download microchip studio from here https://www.microchip.com/en-us/tools-resources/develop/microchip-studi Install the program. I use USBASP to program AVR ATmega328pb. Go to Tools > External Tools > ADD Command: location of avrdude Arguments: Check the Use Output window to be able to see the output of the avrdude inside the microchip studio terminal.
-
How to ATMega328PB to avrdude.conf
I recently bought a few Arduino Uno clones. They were not cheap. They utilise the ch34 IC, which is a USB to UART solution. They all have SMD atmega328pb soldered on them. The problem is that two of them stopped working with the Arduino ide. On inspection, i found out that my software was not…
-
Using USBASP V2.0 AVR Programmer with Raspberry Pi 3
Raspberry pi or Rpi can be used for programming certain AVR microcontrollers. I have made a video showing you the steps. Step 1: you have to install AVRDUDE Step 2: You can check if the avrdude is installed properly or not using step 3: connect your USBASP v2.0 to your microcontroller Microcontroller Programmed: Atmega32, atmega32a,…